3070
PNY
PNY – GeForce RTX™ 3070 8GB XLR8 Gaming REVEL thermal pad sizes
According to one of our user, Gainward RTX 3070 PNY (3070 XLR8) share the exact same cooler design, so the following sizes apply to both model.
All pads are 1mm thick and approximately, you will need at least two package of 80x40mm the cover all required parts.
Picture is from Gainward, however Pad A (11) and Pad B (10) sizes look wrong. They both should be between 40x15mm – 50x15mm.
- Pad A (11) 73.7×5.2x1mm (probably wrong should be between 40x15mm – 50x15mm)
- Pad B (10) 82.1×5.2x1mm (probably wrong should be between 40x15mm – 50x15mm)
- Pad C (12) 27.1×14.2x1mm
- Pad D (1) 61×5.5x1mm
- Pad D (7) 9.5×9.5x1mm
- Pad D (3, 4, 5, 6) 7x7x1mm
- Pad D (2) 62x7x1mm
- Pad D (8, 9) 20x7x1mm
Front of PCB: | 2 pieces of 80x40x1mm |
Sizes guide
About sizes
Sizes you find here come from various sources. Most of them reported by my clients whom successfully replaced their GPUs’ factory thermal pads with high quality aftermarket pads – getting significant results in their temperature drop. Some of these sizes are actual measurements and others just collected from random users on such websites like Reddit, YouTube or official / unofficial forums.
Do your own research
Please note that I cannot take any responsibility for the sizes appearing here. Do your own research as well before buying and replacing anything.
Tips
Share your experience
If you have more accurate information regarding the sizes or anything that worths mentioning please don’t hesitate to share us in the comment form below.